2020-10-16 11:43:47 來源：http://www.eboudy.com/ 53
How to modify the configuration? What steps should be followed?
With permission, the professional maintenance engineer can modify the configuration in the engineer station. Before modifying the configuration, you must confirm that the configuration file is new and has been backed up. When modifying the configuration, please follow the operation manual of configuration software. After the configuration modification is completed, please record the content of configuration modification and backup the configuration file in time.
After configuration modification, do you need to transfer it to the operation station? What should be paid attention to when transferring configuration?
對組態進行的任何修改，都應將組態 “傳送”到各操作站，以保證操作站的運行組態與主控卡保持一致。組態傳送時，應首先注意各個操作站的監控軟件正在運行當中，為了不至對操作站的監控運行造成影響，因此應事先提醒被“傳送”組態的操作站運行人員注意。其次被傳送組態的操作站在組態傳送期間，應提醒操作員暫時停止畫面操作，否則可能會發生傳送失敗的情況。另外組態傳送時，需要注意，務必使得工程師站以及各操作站的“FTP SERVER”軟件處于運行狀態。
In order to ensure that the configuration of each station is consistent with that of the master station. During configuration transmission, it is necessary to pay attention to the operation of the monitoring software of each operation station. In order to avoid affecting the monitoring operation of the operation station, the operator of the operation station that is configured by "transmission" should be reminded in advance. Secondly, during the configuration transmission, the operator should remind the operator to stop the screen operation temporarily, otherwise the transmission failure may occur. In addition, when configuring the transmission, it is necessary to make sure that the "FTP server" software of the engineer station and each operation station is in the running state.